Your Position: Home > FUJI PLC Cable > USB-CNV3 USB/RS422 for Fuji N series PLC

View History

   

USB-CNV3 USB/RS422 for Fuji N series PLC

prev

USB-CNV3 USB/RS422 for Fuji N series PLC
  • NO.: FU01
  • Weight: 300gram
  • Market price: $ 75.8
  • Shop price: $ 22.9
  • Goods click count: 4040
  • Total:
  • Quantity:
Add to cart collect
  

Description

USB-CNV3:USB/RS422 interface cable for Fuji N series PLC



Summary:

USB-CNV3 is the programming cable in which USB interface provided both the serial connection and RS232 signal conversion. Under the control of computer-driven driver,the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface),thus various existing programming software such as communications software,monitoring software and other applications can be normally used.The working power supply of this cable is directly from the USB port,but not the PLC programming interface.The two-color LED on the converter box indicates data’s transceiving status.

USB interface Fuji N Series PLC (NB,NJ,NS,NW0,etc.)programming cable,USB/RS422 interface,3 meters,with communication indicator,the largest communication distance of up to 1.5 kilometers.


Outline configuration:


Features and technological index:
- Support USB-CNV3 operating system:Windows2000/XP (WinNT4/95/98/Me/DOS not included )
- Support USB-CNV3 programming software version:Flex V1.0 and above
- Fully compatible with USB V1.1 norms and USB CDC V1.1
- USB-bus powered,with current consumption of 50 mA
- Baud rate:300 bps~1Mbps automatically adapt to the standard baud rate
- Support UART data format:
  data bits:7-8;
  stop bit:1,2;
  check-bit:odd/even/no parity
- Support long-distance communications,the largest communications is 1.5 kilometer (19200 bps)
- Each PC only supports one USB cable programming
- Working temperature:-20~+75°c
- Cable length:3m;
  Color:black

Usage:
USB device drivers should be installed before using USB-CNV3 programming cable,which are available on the CD-ROM sold together with the cable.And for the specific installation steps,please refer to the instruction files on the CD-ROM drivers,and details are not necessarily listed here.
After completing Driver installation, the corresponding COM port for the USB-CNV3 programming cable will be displayed in the "Device Manager” of Window.The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings.And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.


Long-distance communications:

The largest communications range between the USB-CNV3 programming cable and the PLC is up to 1.5 kilometers (19200 bps).The user must follow the self-made plans to extend cable.Communication lines should be five 8-twisted pair (cable).When the distance is over 1,500m,RS422 repeater (model:E485GA,products of FOURSTAR as well)could be installed to extend the dis

  

User Comment

No comment
Username: Anonymous user
E-mail:
Rank:
Verification code: captcha
Content: