Your Position: Home > Panasonic PLC Cable > USB8550 USB adapter for FP1/FP3/FP5 Panasonnic PLC

View History


USB8550 USB adapter for FP1/FP3/FP5 Panasonnic PLC


USB8550 USB adapter for FP1/FP3/FP5 Panasonnic PLC
  • NO.: AO02
  • Weight: 300gram
  • Market price: $ 85.7
  • Shop price: $ 25.9
  • Goods click count: 3712
  • Total:
  • Quantity:
Add to cart collect


USB8550 USB Panasonnic PLC adapter for FP1/FP3/FP5 PLC


USB8550 is the programming cable in which USB interface provided both the serial connection and RS422 signal conversion.Under the control of computer-driven driver,the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface),thus various existing programming software such as communications software, monitoring software and other applications can be normally used.The working power supply of this cable is directly from the USB port,but not the PLC programming interface.The two-color LED on the converter box indicates data’s transceiving status.


USB8550 programming cable is applicable to FP1 and FP3/FP5 series of Panasonic Electrical PLC.And the FP1 need to use AFP1523 adapter cable to connect USB8550 and FP1,while the FP3/FP5 need to use AFP5523 adapter cable to connect USB8550 and FP3/FP5.The largest communications range of up to 2 Km.
The quality is guaranteed.It's tested before shippment.Not made by Panasonnic,OEM product as the replacement.

Outline configuration:


 Features and technological index:

- Support USB8550 operating system:Windows2000/XP (WinNT4/95/98/Me/DOS do not support).

- Support USB8550 programming software version:FPSOFT V1.1 and above.

- Fully compatible with standard USB V2.0

- USB bus powered,the current consumption of about 50 mA

- Baud rate:300 bps~Mbps automatically adapt to the standard baud rate

- Support UART data format:
  Data bits:7-8,
  Stop bit:1, 2,
  Check-bit:odd/even/no parity

- Support long-distance communications,the largest communications is two kilometers (9600 bps)

- Each PC only supports one USB programming cable.

- Temperature:-20~+75°c

- Cable length:1 m,
  Colors: black

After completing Driver installation,the corresponding COM port for the USB8550 programming cable will be displayed in the "Device Manager” of Window.The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings.And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

Long-distance communications:

The largest communications range between the USB8550 programming cable adapter and the PLC  is up to two kilometers (9600 bps).The user must follow the self-made plans to extend cable.Transmission Line should be 0.22mm2 or more,twisted pair wire. When the distance is over 2,000m,RS422 repeater (model: E485GA, products of FOURSTAR as well)could be installed to extend the distance

Please Note:USB interface cable cannot be extended.
Due to internal resistance have been installed in USB8550 and the PLC,no external terminal resistance is needed.
The delivery takes 7-15 working days by singapore airmail,please leave your address when you pla



User Comment

No comment
Username: Anonymous user
Verification code: captcha