Your Position: Home > GE PLC Cable > IC690USB901 USB/SNP interface GE 90 series PLC adapter

View History

   

IC690USB901 USB/SNP interface GE 90 series PLC adapter

prev

IC690USB901 USB/SNP interface GE 90 series PLC adapter
  • NO.: GE01
  • Weight: 300gram
  • Market price: $ 85.7
  • Shop price: $ 25.9
  • Goods click count: 4344
  • Total:
  • Quantity:
Add to cart collect
  

Description

IC690USB901:USB/SNP interface GE 90 series PLC programming cable


Description:


USB/SNP interface GE 90 series PLC programming cable,3 meters,with communication indicator,the largest communication distance of up to 1.5 kilometers.


Introduction

IC690USB901 is a conversion programming electric cable that provides the serial connection and the RS422 signal conversion and the SNP protocol through the USB connection and that is moved under the driver control in the computer and becomes the traditional serial port by simulating computer's USB connection (to be named the COM mouth),and then could be used to exist each kind of application software and so on programming software,correspondence software and monitoring software.This electric cable's work power source is from the USB port, no longer by the PLC programming mouth power supply and the bi-color light emitter diode on the transformed box indicates the data receiving and dispatching condition.

The IC690USB901 programming electric cable is suitable for GE 90 series PLC.





Characteristic and technical specification:

● The operating system that supports IC690USB90:Windows2000/XP (WinNT4/95/98/Me/DOS support)
● The programming software release that supports IC690USB901:CIMPLICITY ME V5.0 and above
● The standard that completely compatible USB V1.1 and USB CDC V1.1
● USB main line supply power and current sinking approximately 50mA
● Baud rate:the 300bps~1Mbps standard baud rate adapts automatically
● Supports the UART data format:Data position:7th,8,stop the position:1st,2,verification position:odd/even/no parity
● Support long distance correspondence biggest signal distance 1.5 kilometers (when 19200bps)
● Each PC only supports a USB programming electric cable
● Operating temperature:-20~+75℃
● Cable length:3 meters,
  color:Black


Remote communication:

The maximum signal distance between IC690USB901 programming electric cable and the PLC may amount to 1.5 km (when 19200bps).The user must self-extend electric cable through the following chart and the order wire uses the cross-sectional area is the 0.22mm2 above shielded twisted pair.When the distance is longer than 1500 meters may install the RS422 repeater  (the model: E485GA) in the line to lengthen the signal distance.

Note: Cannot lengthen the USB connection the electric cable.



  

User Comment

No comment
Username: Anonymous user
E-mail:
Rank:
Verification code: captcha
Content: