Your Position: Home > MITSUBISHI PLC Cable > FX series plc cable > USB-SC09 for FX and A PLC

View History


USB-SC09 for FX and A PLC


USB-SC09 for FX and A PLC
  • NO.: MI04
  • Weight: 500gram
  • Market price: $ 33.0
  • Shop price: $ 15.0
  • Goods click count: 6836
  • Total:
  • Quantity:
Add to cart collect


Mitsubishi PLC Programming Cable USB SC09 ,USB interface,for Mitsubishi FX & A series


USB Cable for Mitsubishi FX and A series PLC,8 pin DIN connector.Supports Windows98/ME/2000/Windows XP.This cable is an OEM replacement and not made by Mitsubishi.

Features and technological index:

1. Support USB-SC09 operating system: Windows2000/XP/98/ME

2. Support USB-SC09 programming software version: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0 and above.

3. Fully compatible with USB V1.1 norms and USB CDC V1.1 

4.  USB-bus powered, with current consumption of 50 mA 

5.  Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate

6. Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity

7.  Support long-distance communications, the largest communications is two kilometers (9600 bps) 

8.  Each PC only supports one USB cable programming 

9.  Working temperature: -20 ~ +75 ℃ 

10.  Cable length: 3m; Color: black


1. USB device drivers should be installed before using USB-SC09 programming cable.   

2. After completing Driver installation, the corresponding COM port for the USB-SC09 programming cable will be displayed in the “Device Manager” of Window. The step next is just to   choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.


User Comment

No comment
Username: Anonymous user
Verification code: captcha