Your Position: Home > MITSUBISHI PLC Cable > Q & A series plc cable > Industrial Mitsubishi Q series of PLC programming cable USB-QC30R2 yellow

View History

   

Industrial Mitsubishi Q series of PLC programming cable USB-QC30R2 yellow

prevnext

Industrial Mitsubishi Q series of PLC programming cable USB-QC30R2 yellow
  • NO.: USB-QC30R2-YE
  • Weight: 300gram
  • Market price: $ 39.6
  • Shop price: $ 18.0
  • Goods click count: 5488
  • Total:
  • Quantity:
Add to cart collect
  

Description

USB-SC09 is a kind of programming cable which can provide you the serial connection and RS422 signal transformation through USB interface. Under the control of computers running driver procedure, it simulates USB interface into the traditional serial ports (known as COM ports), that you can use all the existing programming software, communication software and monitoring software and some application software etc.

The working power of this cable comes from USB port. It is no longer supplied the power by PLC programming port. The double color shining diode on conversion box indicates transmition-reciveing situation of the data.

USB-QC30R2 programming cable applies to the Mitsubishi Q series of PLC (Q mode).

 

USB-QC30R2 cable construction appearance:

Characteristics and technical index:

Support USB-QC30R2 operating system: Windows/XP (WinNT4/95/98 / Me /DOS does not support)

Support USB-QC30R2 programming software version: GPP V4.0, GX Developer V7.0 and above version

Fully compatible USB V1.1 and USB CDC V1.1 norms

USB bus power supply, had about 50mA current consumption

Baud rate: 300 BPS --1 Mbps standard baud rate automatically ADAPTS to

Support UART Data format: data bits: 7, 8, and stop bits: 1, 2, Check Bit: odd/that/no parity

Each PC only support a piece of USB programming cable

Working Temperature:-20--75 degree

The cable length: 3 meters,    Color: Yellow


Method of use:

USB-QC30R2 programming cable need to install the USB device driver to use, the drivers are included in the products CD. The installation method, please look at the instructions on the driver disc document material, here no longer tautology.

After the finish of driver installation, the Windows device manager will come out from the USB-QC30R2 programming cable USB-corresponding COM port. Just need to choose this COM port in the programming software or other application software. Other communications parameters use default Settings, the next operation steps is the same with the traditional RS232 port programming cable.


Telecommunication:

USB-QC30R2 programming cable does not support long distance communication, if you the need the long distance communication, please choose RS232 long-line drive (eight wire, type: SC -232 E, produced).

Note: can't extend the USB interface cables.


 

  

User Comment

No comment
Username: Anonymous user
E-mail:
Rank:
Verification code: captcha
Content: